Metal Working Fluid Concentrate M1025
Introduction
Metal Working Fluid Concentrate M1025 is Ionic cutting and grinding fluid formulated from water-soluble rust inhibitors, lubricity additives, ionic surfactants, etc.
Features
Convenient to use, it can significantly improve the surface smoothness of the workpiece, reduce grinding wheel wear, improve grinding efficiency, extend the service life, and reduce environmental pollution.
Application
This product is a grinding fluid for high-precision grinding machines, and is also suitable for grinding ordinary grinding machines and centerless grinding machines.
Use Method
1. Dilute with ordinary tap water to a concentration of 3-5% during grinding, and it can be used. When cutting, the concentration should be set at 10-15%.
2. When using, it is necessary to regularly observe the pH value and effective component concentration, and regularly supplement the newly prepared working solution. If there is any deterioration or odor, it should be thoroughly replaced.
Product Typical Data
| Item |
Index |
| Appearance |
Amber transparent liquid |
| Antifoam Performance, ml/10min |
2 |
| Surface Tension, mN/m |
40 |
| pH Value |
7.5-9.5 |
| Rust Resistance, 35 ± 2 ºC |
Cast iron single piece, 24h |
Qualified |
| Lamination, 4h |
| Corrosion Test, 55 ± 2 ºC |
Cast iron sheet, 24h |
Qualified |
| H62 Copper, 4h |
| LY12 Aluminium, 4h |
Package & Storage:
200L standard drum, 1000KGS IBC-Tank or made to order.
Store indoors above 0ºC, out of direct sunlight, prevent water and other impurities from mixing in.
Audited Supplier 
){kind=link}
){kind=link}