| Customization: | Available |
|---|---|
| Environmental Protection: | Yes |
| Color: | Light Yellow to Light Brown Liquid |
|
Still deciding? Get samples of US$ 5/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Chorus-6110 is an ashless antiwear and antirust additive containing phosphorus and nitrogen, its performance is comparable to the best similar products in Europe and the United States. It has the advantages of high performance and low cost.
The product are widely used in gear oils, metalworking fluids, greases, turbine oils and air compressor oils.
Countertype of NA-LUBE AW-6110
The features of this product are as follows:
Excellent anti-wear and anti-rust performance, which is the top product in the industry.
Ashless additives, does not contain any metals.
Soluble in all kinds of base oils, and good compatibility with compound products and oils.
Light color, no pungent odor, suitable for high-end products.
| Item | Typical Value |
| Appearance | Light Yellow to Light Brown Liquid |
| Flash Point, (close) | >120°C |
| Density, 25 °C | 1.0 g/mL |
| Viscosity, 100 °C | 40 cst |
| Viscosity, 40 °C | 470 cst |
| Phosphate Content | 8.7% |
| Nitrogen Content | 1.6% |
* Note: The above data is a typical value and does not represent the index range of the product.
Recommended Treat Rate
Treat rate of Chorus-6110 as an antiwear additive:
| Automotive and Industrial Gear Oil | 0.1 - 0.5 wt% |
| Grease | 0.25 - 1 wt% |
| Metalworking Fluid | 0.1 - 0.5 wt% |
| Other Lubricants | 0.1 - 1 wt% |
Due to the lubricant formulations' diversity, the above data is only for reference.
Users are advised to adjust based on actual formulation. In most Lubricant Oil and Grease, 0.15% is as a testing base treat rate, the real dosage should be higher or lower according to the tested anti-wear performance.
Treat rate of Chorus-6110 as a antirust additive :
The recommended treat rate in lubricant oil is 0.01 - 0.2, wt%.
Users are advised to adjust based on actual formulation. In most Lubricant Oil and Grease, 0.10% is as a testing base treat rate, the real dosage should be higher or lower according to the tested anti-wear performance.
Typical Test Data
Chorus-6110 Anti-wear Test Data:| Test oil | Treat Rate of Chorus-6110 | Test Result |
| Base oil 100N | 0.0% | 0.88mm |
| Base oil 100N | 0.2% | 0.35mm |
| Test oil | Treat Rate of Chorus-6110 | Test Result |
| Base oil 100N | 0.00% | Severely rusted, failed |
| Base oil 100N | 0.1% | Completely no rust, passed |
Storage: Store in a cool,dry place away from any direct source of heat and moisture. Maximum recommended storage temperature is 45°C.
Shelf life: 2 years. If beyond the storage period, it can still be used after passing the test.
Package: N.W. 180kg / 200L drum.
Q1: How long is the delivery time generally?
If there is inventory and order is determined, generally about 7 days can be sent to the port.
If there is no inventory, according to the order quantity and raw materials, generally about 2 weeks can be produced and sent to the port.
In case of the large quantity and shortage of raw materials,it is necessary to confirm the delivery time.
Q2: What are the terms of payment?
According to the order, if the amount is less than USD1000, it is 100% advance, because the bank fee is very high.
The standard payment method is 30% telegraphic transfer advance payment, and 70% of the balance payment will be paid by telegraphic transfer after the copy of the bill of lading.
We can accept the letter of credit, but the requirement is 100% machine irrevocable letter of credit, and the contract amount should generally be above USD20000, because the operation of the letter of credit is cost, including notice fee, order review fee, payment fee, mailing fee, inconsistent fee, cost of capital, etc. Therefore, under normal circumstances, the unit price of letter of credit payment is 50-100 / ton higher than USD than that of telegraphic transfer payment.
We do not accept credit sales (OA), in fact, so far, our company has not made a credit sales payment method.
Other circumstances shall be settled by both parties through friendly negotiation.
Q3: How to deal with the quality problem of the goods?
First, check whether it is transportation, storage, or improper use of the formula. Then, check whether the COA index is within the qualified range, and with the factory to confirm which indicators have the problem, whether the raw materials have been replaced. Secondly, it can be tested by the third party,if the real index or quality goes wrong, can it be compensated in the subsequent order? Or the customer mixed with the use, in the local resale, or reissue, the worst intention is to return.
Q4: Can you give me a discount?
Of course, we will offer you the best discount according to the quantity of your order.
Our Production - Chinese Manufacturer of Lubricant Additives: High-Quality Products and Services
As a Chinese manufacturer of lubricant additives, we have a standardized production workshop that spans 8000 square meters and houses 6 production lines. Our team of over 60 skilled workers, 15 sales professionals, 20 technical engineers, and 4 after-sales service members are committed to delivering high-quality products and services to our customers.
Our factory has a streamlined production process, stringent quality control measures, and efficient delivery systems, supported by a comprehensive after-sales service framework that includes a lifetime free support guarantee and quality warranty.
){kind=link}