Part I: Product Introduce
T9080 Automatic Transmission Fluid (ATF) Additive Package is high quality ashless type additive, which is designed to meet GM Dexron- and Ford Mercon specification requirement, also it can meet the specification requirement of Allison Transmission Division C-4 and Caterpillar TO-2.
T9080 additive is a multifunctional additive package that offers the ability to easily formulate high quality automatic transmission fluids, using a wide variety of base stocks.
Fluids formulated with T9080 additive have been approved by all the major oversea original equipment manufacturers for both passenger car and commercial vehicle applications. The result is a package which enables straightforward blending of fluids capable of exceeding the requirements of the major oversea OEM service fill specifications.
Part II: Features of the ATF Additive Package
Synthetic product with excellent therm-oxidative stability and low temperature performance
Suitable friction characteristics for smooth shift durability
Excellent extreme pressure wear performance and reliability
Excellent anti-chatter characteristics
Part III: Recommended Treat Rate
Performance Level |
Treat Rate (wt%) |
GM Dexron-III |
5.5 |
Ford Mercon |
Allison C-4 |
Caterpillar TO-2 |
Recommend Formulation for ATF
Material |
Content, wt% |
Yubase 4 base oil (100N, group III) |
89.2 |
VII |
5 |
ATF Additive Package T9080 |
5.5 |
PPD |
0.3 |
Defoamer |
trace |
Recommend Formulation for CVT
Material |
Content, wt% |
Yubase 4 base oil (100N, group III) |
45.6 |
Synthetic Ester |
45.6 |
VII |
3 |
ATF Additive T9080 |
5.5 |
PPD |
0.3 |
Defoamer |
trace |
Part IV: Dates of the ATF Additive Package
Item |
Typical Value |
Test Method |
Appearance |
Red Brown Viscous Liquid |
Visual |
Density (20ºC), g/cm 3 |
0.9676 |
GB/T 1884 |
Kinematic Viscosity (40ºC), mm 2/s |
97.68 |
GB/T 265 |
Flash Point (COC), ºC |
150 |
GB/T 3536 |
Nitrogen, wt% |
0.89 |
SH/T 0224 |
Sulfur, wt% |
2.65 |
SH/T 0303 |
Phosphorus, wt% |
3.19 |
SH/T 0296 |
Part V: Package
Packed in 200L metal drum, IBC-Tank or made to order.
Long term storage temperature should not exceed 45ºC.
Handle & blending temperature should not exceed 65ºC.
Not dangerous chemical, store in dry & clean warehouse.